Wire Art Tutorials

Level of Tutorial: ADVANCED Materials and tools: -shark tooth around 30 mm tall and 25 mm wide -20ga (0.8 mm) base wire: 1x 6 inches (15 cm), 2x 4 inches (10 cm) -28ga (0.3 mm) weaving wire: 1x 48 inches (120 cm) -optional but recommended: hammer and steel bench or steel block

Level of tutorial: INTERMEDIATE Materials and tools: -chain nose or flat nose pliers, round nose or bail making pliers, wire cutters -35 mm long teardrop shaped cabochon -22ga (0.6 mm) wire: 4x 16 inches (40 cm), 3x 4 inches (10 cm), 1x 8 inches (20 cm) -26ga (0.4 mm) wire (optional): 3x 4 inches (10 cm)

Level of Tutorial: ADVANCED Materials and tools: -chain nose or flat nose pliers, round nose pliers, wire flush cutter -round shaped cabochon between 25-30 mm big -8 marquise shaped faceted stones of 10 mm long each -20ga (0.8 mm) wire: 1x 24 inches (60 cm), 1x 8 inches (20 cm) -18ga (1 mm) wire: 1x 8 inches (20 cm) -28ga (0.3 mm) wire: 1x 80 inches (200 cm), 8x 4 inches (10 cm), 1x 16 inches (40 cm) -26ga (0.4 mm) wire: 1x 30 inches (75 cm) -22ga (0.6 mm) wire: 2x 12 inches